Information of news
  • Views: 261
  • Author: 4lovek
  • Date: 12-11-2011, 13:24
 (Votes #: 0)

Bob Tascione - Learn To Turn Lathe Course

Category: PhotoShop

Download Now

Bob Tascione - Learn To Turn Lathe Course

4 DVDs | iso | English | 11.78 GB


DOWNLOAD

Genre: Video training

In this first lesson you re going to learn the very basics of turning for the clock & watchmaker on what can be the most valuable tool in the shop when you know how to use it properly, that s the 8mm jewelers or watchmakers lathe.

Even though this machine s capable of doing just about any turning job you ll come across in the shop it s usually found sitting in a corner somewhere, and if it s ever used it s just for something simple like polishing parts. Well I want to tell you now that it s really not the owners fault if this machine s just sitting collecting dust. Even though it s an extremely capable, versatile machine it s just about useless if you don t master the few simple basic techniques that you ll need to run it.

Back when watch and clock makers went through a formal training course or apprenticeship they were required to practice these basics and became proficient at turning common parts very quickly. When they finally graduated and opened their own shops they would spend a very large portion of their start-up capitol on the lathe which was thought to be the most important tool in the shop. They used it a lot because they knew what it was capable of doing and how to do it.

Well the majority of these watch and clock makers have retired from the trade and have left behind many of these lathes which are available at a fraction of the cost of a new machine just waiting to be put back in use. The problem is that there aren t many people around any longer to teach how they re used. Well, that s what you re going to do in this video. You re going to cover the use of hand gravers until you actually learn to feel the metal being machined. That feel means a lot of things. It s something you ll acquire through a little practice. It s knowing what speed is best for a given hardness or type of metal, knowing how much pressure to apply with your graver and a lot of other little things, without ever having to think about it. Kind of like driving a car. Once you ve learned the basics it becomes second nature, but try driving without knowing where the brakes are or what the steering wheel s for and you re probably going to get discouraged and park the thing somewhere to collect dust too. Well there s absolutely no better way to acquire that feel than to learn with hand gravers first and absolutely nothing as important as acquiring that feel if you plan on moving onto other types of lathes with cross slides or really any other type of machining, get this under your belt and the rest will come naturally. You ll automatically adjust the graver for things like positive or negative rake just by tilting it a little in your hand without thinking about it, then when you start using cross slides with toolbits you ll know exactly what bit to use, at which angle and just how fast to feed it across the metal. It will feel natural. Other types of lathes with compound slides and toolholders certainly have their place in the shop but as a machinist and toolmaker I can tell you that many turning jobs you ll encounter in a clock or watch shop can be set up in the 8mm lathe, machined with a hand graver, removed and possibly even replaced in the clock or watch in less time than it takes to even set-up one of these other machines. You ll see how simple yet valuable these machines really are when you learn a few little secrets on how to use hand gravers.

http://www.filesonic.com/file/1956385754/BobTasLeaToTurLatCou.part01.rar1

http://www.filesonic.com/file/1956299111/BobTasLeaToTurLatCou.part02.rar2

http://www.filesonic.com/file/1956201271/BobTasLeaToTurLatCou.part03.rar3

http://www.filesonic.com/file/1956160251/BobTasLeaToTurLatCou.part04.rar4

http://www.filesonic.com/file/1956160261/BobTasLeaToTurLatCou.part05.rar5

http://www.filesonic.com/file/1956162401/BobTasLeaToTurLatCou.part06.rar6

http://www.filesonic.com/file/1956160281/BobTasLeaToTurLatCou.part07.rar7

http://www.filesonic.com/file/1956162681/BobTasLeaToTurLatCou.part08.rar8

http://www.filesonic.com/file/1956160411/BobTasLeaToTurLatCou.part09.rar9

http://www.filesonic.com/file/1956162701/BobTasLeaToTurLatCou.part10.rar10

http://www.filesonic.com/file/1956160391/BobTasLeaToTurLatCou.part11.rar11

http://www.filesonic.com/file/1956160381/BobTasLeaToTurLatCou.part12.rar12

http://www.filesonic.com/file/1956201671/BobTasLeaToTurLatCou.part13.rar13

http://www.filesonic.com/file/1956182611/BobTasLeaToTurLatCou.part14.rar14

http://www.filesonic.com/file/1956185671/BobTasLeaToTurLatCou.part15.rar15

http://www.filesonic.com/file/1956185601/BobTasLeaToTurLatCou.part16.rar16

http://www.filesonic.com/file/1956182601/BobTasLeaToTurLatCou.part17.rar17

http://www.filesonic.com/file/1956227631/BobTasLeaToTurLatCou.part18.rar18

http://www.filesonic.com/file/1956298294/BobTasLeaToTurLatCou.part19.rar19

http://www.filesonic.com/file/1956203471/BobTasLeaToTurLatCou.part20.rar20

http://www.filesonic.com/file/1956287321/BobTasLeaToTurLatCou.part21.rar21

http://www.filesonic.com/file/1956294314/BobTasLeaToTurLatCou.part22.rar22

http://www.filesonic.com/file/1956013061/BobTasLeaToTurLatCou.part23.rar23

http://www.filesonic.com/file/1956013041/BobTasLeaToTurLatCou.part24.rar24

http://www.filesonic.com/file/1956227061/BobTasLeaToTurLatCou.part25.rar25

http://www.filesonic.com/file/1956012961/BobTasLeaToTurLatCou.part26.rar26

http://www.filesonic.com/file/1956013001/BobTasLeaToTurLatCou.part27.rar27

http://www.filesonic.com/file/1956187751/BobTasLeaToTurLatCou.part28.rar28

http://www.filesonic.com/file/1956185691/BobTasLeaToTurLatCou.part29.rar29
Direct Download


Tags: Tascione, Course


Bob Tascione - Learn To Turn Lathe Course Fast Download via Rapidshare Hotfile Fileserve Filesonic Megaupload, Bob Tascione - Learn To Turn Lathe Course Torrents and Emule Download or anything related.
Dear visitor, you went to website as unregistered user.
We encourage you to Register or Login to website under your name.

Add comments

Name:*
E-Mail:*
Comments:
Enter Code: *